Fortigate 1800F seadme kasutamine

Sissejuhatus

TODO

Tööpõhimõte

TODO

Misc

TODO

root@pve-moraal-x570:~# dmesg -w -T
...
[Sun Mar 12 19:15:50 2023] usb 1-5: new full-speed USB device number 3 using xhci_hcd
[Sun Mar 12 19:15:50 2023] usb 1-5: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
[Sun Mar 12 19:15:50 2023] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[Sun Mar 12 19:15:50 2023] usb 1-5: Product: FT232R USB UART
[Sun Mar 12 19:15:50 2023] usb 1-5: Manufacturer: FTDI
[Sun Mar 12 19:15:50 2023] usb 1-5: SerialNumber: A9VMWTX8
[Sun Mar 12 19:15:50 2023] usbcore: registered new interface driver usbserial_generic
[Sun Mar 12 19:15:50 2023] usbserial: USB Serial support registered for generic
[Sun Mar 12 19:15:50 2023] usbcore: registered new interface driver ftdi_sio
[Sun Mar 12 19:15:50 2023] usbserial: USB Serial support registered for FTDI USB Serial Device
[Sun Mar 12 19:15:50 2023] ftdi_sio 1-5:1.0: FTDI USB Serial Device converter detected
[Sun Mar 12 19:15:50 2023] usb 1-5: Detected FT232RL
[Sun Mar 12 19:15:50 2023] usb 1-5: FTDI USB Serial Device converter now attached to ttyUSB0

Serial konsooli kasutamine - OpenBSD

# dmesg
...
uftdi0 at uhub0 port 2 configuration 1 interface 0 "FTDI FT232R USB UART" rev 2.00/6.00 addr 2
ucom0 at uftdi0 portno 1
uftdi1 at uhub0 port 1 configuration 1 interface 0 "FTDI FT232R USB UART" rev 2.00/6.00 addr 7
ucom1 at uftdi1 portno 1

Konsoolile kinnitumiseks sobib öelda

openbsd69-tookoht# cu -s 9600 -l cuaU1 
Connected to /dev/cuaU1 (speed 9600)

moraal-vasak login: admin
Password: 
Welcome!

moraal-vasak #

Serial konsooli kasutamine - Linux

imre@pve-moraal-x570:~$ cu -s 9600 -l /dev/ttyUSB0 
Connected.
CPU(00:00050657 bfebfbff): MP initialization 
CPU(01:00050657 bfebfbff): MP initialization 
CPU(02:00050657 bfebfbff): MP initialization 
CPU(03:00050657 bfebfbff): MP initialization 
CPU(04:00050657 bfebfbff): MP initialization 
CPU(05:00050657 bfebfbff): MP initialization 
CPU(06:00050657 bfebfbff): MP initialization 
CPU(07:00050657 bfebfbff): MP initialization 
CPU(10:00050657 bfebfbff): MP initialization 
CPU(11:00050657 bfebfbff): MP initialization 
CPU(12:00050657 bfebfbff): MP initialization 
CPU(13:00050657 bfebfbff): MP initialization 
CPU(14:00050657 bfebfbff): MP initialization 
CPU(15:00050657 bfebfbff): MP initialization 
CPU(16:00050657 bfebfbff): MP initialization 
CPU(17:00050657 bfebfbff): MP initialization 
Total RAM: 24560MB
Enabling cache...Done.
Scanning PCI bus...Done.
Allocating PCI resources...Done.
Enabling PCI resources...Done.
Zeroing IRQ settings...Done.
Verifying PIRQ tables...Done.
Boot up, boot device capacity: 28626MB.
Press any key to display configuration menu...
.............................

Reading boot image 3192428 bytes.
Initializing firewall...
System is starting...

openbsd-tk# cu -s 9600 -l cuaU0 
Connected to /dev/cuaU0 (speed 9600)


FortiGate-1800F login: 

FortiGate-1800F login: admin
Password: 
Login incorrect


FortiGate-1800F login: admin
Password: 
You are forced to change your password. Please input a new password.
New Password: 
Confirm Password: 
Welcome!

FortiGate-1800F # 

FortiGate-1800F # config system interface

FortiGate-1800F (interface) # edit mgmt1

FortiGate-1800F (mgmt1) # show
config system interface
    edit "mgmt1"
        set vdom "root"
        set ip 192.168.1.99 255.255.255.0
        set allowaccess ping https ssh fgfm
        set type physical
        set dedicated-to management
        set role lan
        set snmp-index 1
    next
end

FortiGate-1800F (mgmt1) # set ip 192.168.10.206/24

FortiGate-1800F (mgmt1) # end


FortiGate-1800F # config router static

FortiGate-1800F (static) # show
config router static
end

FortiGate-1800F (static) # edit 1
new entry '1' added

FortiGate-1800F (1) # set gateway 192.168.10.254

FortiGate-1800F (1) # set device mgmt1

FortiGate-1800F (1) # end

Kasulikud lisamaterjalid

• TODO