Oxidized kasutamine

Sissejuhatus

TODO

Mock switch - Linux kasutaja shell script

Mock switch seisneb Linux operatsioonisüsteemi tavalise kasutaja tekitamises, mille shell on asendatud nt sellise skriptiga

root@zabbix-pub-01:~# cat /home/cisco/router_cli.sh
#!/bin/bash

# 1. Capture the input arguments
CMD="$@"

# 2. If the command starts with "-c ", strip it out completely
if [[ "$CMD" == -c\ * ]]; then
    CMD="${CMD#-c }"
fi

# 3. Clean up any accidental wrapping quotes or double quotes
CMD=$(echo "$CMD" | tr -d '"' | tr -d "'")

# 4. Run the evaluation match on the cleaned command string
case "$CMD" in
    "show run"|"show running-config"|"show startup-config")
        cat /home/cisco/mock_cisco.cfg
        exit 0
        ;;
    "show version")
        echo "Cisco IOS Software, Simulation Engine Version 1.0(MOCK)"
        exit 0
        ;;
    "terminal length 0"|"terminal width 0"|"")
        # Handle Oxidized setup initializations cleanly
        exit 0
        ;;
    *)
        echo "Error: Command '$CMD' not implemented on this mock switch."
        exit 1
        ;;
esac

Kasutamiseks

imreoolberg@Imres-MacBook-Air ~ % ssh cisco@192.168.10.193 "show run"
cisco@192.168.10.193's password:
!
hostname mock-edge-sw01
!
interface GigabitEthernet1/1
 description Uplink to Core
 switchport mode trunk
!
interface GigabitEthernet1/2
 description Connected to Zabbix Proxy
 switchport access vlan 10
!
end
imreoolberg@Imres-MacBook-Air ~ %

Kasulikud lisamaterjalid

• TODO