Cisco kommutaator: erinevus redaktsioonide vahel

Allikas: Imre kasutab arvutit
Mine navigeerimisribaleMine otsikasti
(Uus lehekülg: '===Sissejuhatus=== TODO ===Misc=== Vlan liidese moodustamine <pre> harjutus-sw#conf t Enter configuration commands, one per line. End with CNTL/Z. harjutus-sw(config)#vlan 221 harjutus-sw(config-vlan)#name vlan_name_222 harjutus-sw(config-vlan)#end harjutus-sw# harjutus-sw#show run vlan 222 Building configuration... Current configuration: ! vlan 222 name vlan_name_222 end </pre> Vlan liidese seadistuse esitamine <pre> harjutus-sw#sh run int vlan 10 Building config...')
 
Resümee puudub
 
(ei näidata sama kasutaja 5 vahepealset redaktsiooni)
3. rida: 3. rida:
 
TODO
  
TODO
   
  +
===Serial kaabli kasutamine===
−
===Misc===
  
  +
  +
Sobib kasutamiseks nö tavaline cisco helesinine lint kaabel, üks ots rj45 ja teine ots 9-pin serial mamma (nt ühendada arvutisse üle serial-usb-dongle)
  +
  +
<pre>
  +
$ cu ... -s 9600
  +
</pre>
  +
  +
===Kasutajate haldamine===
  +
  +
Uue kasutaja lisamiseks sobib öelda
  +
  +
<pre>
  +
conf t
  +
username ...
  +
</pre>
  +
  +
===Failisüsteemiga töötamine===
  +
  +
Seadistuse salvestamine flash seadmele
  +
  +
<pre>
  +
harjutus-sw#copy running-config flash1:imretest-rc
  +
  +
harjutus-sw#dir
  +
Directory of flash:/
  +
  +
2 -rwx 3096 Mar 1 1993 04:37:25 +02:00 multiple-fs
  +
3 -rwx 796 Mar 1 1993 04:37:40 +02:00 vlan.dat
  +
4 -rwx 3843 Mar 1 1993 04:37:25 +02:00 private-config.text
  +
5 -rwx 7477 Mar 1 1993 04:32:07 +02:00 imretest-rc
  +
6 -rwx 14610998 Dec 9 2018 14:02:18 +02:00 c3750e-ipbasek9-mz.122-55.SE12.bin
  +
8 -rwx 6048 Mar 1 1993 04:37:25 +02:00 config.text
  +
</pre>
  +
  +
Salvestatud seadistuse kasutusele võtmine ('replace' asendab kogu parasjagu kehtestatud seadistuse failis oleva seadistusega)
  +
  +
<pre>
  +
harjutus-sw#configure replace flash1:imretest-rc
  +
This will apply all necessary additions and deletions
  +
to replace the current running configuration with the
  +
contents of the specified configuration file, which is
  +
assumed to be a complete configuration, not a partial
  +
configuration. Enter Y if you are sure you want to proceed. ? [no]: y
  +
Total number of passes: 0
  +
Rollback Done
  +
  +
harjutus-sw#
  +
</pre>
  +
  +
===VLAN===
   
 
Vlan liidese moodustamine
  
Vlan liidese moodustamine
38. rida: 88. rida:
   
 
harjutus-sw#
  
harjutus-sw#
  +
</pre>
  +
  +
===LACP===
  +
  +
Seadistamine
  +
  +
TODO
  +
  +
Tulemuse esitamine
  +
  +
<pre>
  +
harjutus-sw#show etherchannel detail
  +
Channel-group listing:
  +
----------------------
  +
  +
Group: 20
  +
----------
  +
Group state = L2
  +
Ports: 2 Maxports = 16
  +
Port-channels: 1 Max Port-channels = 16
  +
Protocol: LACP
  +
Minimum Links: 0
  +
Ports in the group:
  +
-------------------
  +
Port: Gi1/0/11
  +
------------
  +
  +
Port state = Down Not-in-Bndl
  +
Channel group = 20 Mode = Active Gcchange = -
  +
Port-channel = null GC = - Pseudo port-channel = Po20
  +
Port index = 0 Load = 0x00 Protocol = LACP
  +
  +
Flags: S - Device is sending Slow LACPDUs F - Device is sending fast LACPDUs.
  +
A - Device is in active mode. P - Device is in passive mode.
  +
  +
Local information:
  +
LACP port Admin Oper Port Port
  +
Port Flags State Priority Key Key Number State
  +
Gi1/0/11 SA down 32768 0x14 0x0 0x10C 0x45
  +
  +
Age of the port in the current state: 0d:00h:09m:13s
  +
  +
Port: Gi1/0/12
  +
------------
  +
  +
Port state = Down Not-in-Bndl
  +
Channel group = 20 Mode = Active Gcchange = -
  +
Port-channel = null GC = - Pseudo port-channel = Po20
  +
Port index = 0 Load = 0x00 Protocol = LACP
  +
  +
Flags: S - Device is sending Slow LACPDUs F - Device is sending fast LACPDUs.
  +
A - Device is in active mode. P - Device is in passive mode.
  +
  +
Local information:
  +
LACP port Admin Oper Port Port
  +
Port Flags State Priority Key Key Number State
  +
Gi1/0/12 SA down 32768 0x14 0x0 0x10D 0x45
  +
  +
Age of the port in the current state: 0d:00h:08m:38s
  +
  +
Port-channels in the group:
  +
---------------------------
  +
  +
Port-channel: Po20 (Primary Aggregator)
  +
  +
------------
  +
  +
Age of the Port-channel = 0d:00h:10m:08s
  +
Logical slot/port = 10/20 Number of ports = 0
  +
HotStandBy port = null
  +
Port state = Port-channel Ag-Not-Inuse
  +
Protocol = LACP
  +
Port security = Disabled
 
</pre>
  
</pre>
   
44. rida: 167. rida:
 
* cheat sheet - https://www.slideshare.net/slideshow/cisco-switch-commands-cheat-sheet/31026863
  
* cheat sheet - https://www.slideshare.net/slideshow/cisco-switch-commands-cheat-sheet/31026863
 
* https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/15-0_2_se/configuration/guide/3750x_cg/swvlan.html
  
* https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/15-0_2_se/configuration/guide/3750x_cg/swvlan.html
  +
* https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750/software/release/12-2_52_se/configuration/guide/3750scg/swiosfs.html

Viimane redaktsioon: 9. juuni 2024, kell 01:50

Sissejuhatus

TODO

Serial kaabli kasutamine

Sobib kasutamiseks nö tavaline cisco helesinine lint kaabel, üks ots rj45 ja teine ots 9-pin serial mamma (nt ühendada arvutisse üle serial-usb-dongle) 

$ cu ... -s 9600

Kasutajate haldamine

Uue kasutaja lisamiseks sobib öelda 

conf t
username ...

Failisüsteemiga töötamine

Seadistuse salvestamine flash seadmele 

harjutus-sw#copy running-config flash1:imretest-rc

harjutus-sw#dir                                   
Directory of flash:/

    2  -rwx        3096   Mar 1 1993 04:37:25 +02:00  multiple-fs
    3  -rwx         796   Mar 1 1993 04:37:40 +02:00  vlan.dat
    4  -rwx        3843   Mar 1 1993 04:37:25 +02:00  private-config.text
    5  -rwx        7477   Mar 1 1993 04:32:07 +02:00  imretest-rc
    6  -rwx    14610998   Dec 9 2018 14:02:18 +02:00  c3750e-ipbasek9-mz.122-55.SE12.bin
    8  -rwx        6048   Mar 1 1993 04:37:25 +02:00  config.text

Salvestatud seadistuse kasutusele võtmine ('replace' asendab kogu parasjagu kehtestatud seadistuse failis oleva seadistusega) 

harjutus-sw#configure replace flash1:imretest-rc
This will apply all necessary additions and deletions
to replace the current running configuration with the
contents of the specified configuration file, which is
assumed to be a complete configuration, not a partial
configuration. Enter Y if you are sure you want to proceed. ? [no]: y
Total number of passes: 0
Rollback Done

harjutus-sw#

VLAN

Vlan liidese moodustamine 

harjutus-sw#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
harjutus-sw(config)#vlan 221
harjutus-sw(config-vlan)#name vlan_name_222
harjutus-sw(config-vlan)#end
harjutus-sw#

harjutus-sw#show run vlan 222
Building configuration...

Current configuration:
!
vlan 222
 name vlan_name_222
end

Vlan liidese seadistuse esitamine 

harjutus-sw#sh run int vlan 10
Building configuration...

Current configuration : 65 bytes
!
interface Vlan10
 ip address 192.168.10.156 255.255.255.0
end

harjutus-sw#

LACP

Seadistamine 

TODO

Tulemuse esitamine 

harjutus-sw#show etherchannel detail 
		Channel-group listing: 
		----------------------

Group: 20 
----------
Group state = L2 
Ports: 2   Maxports = 16
Port-channels: 1 Max Port-channels = 16
Protocol:   LACP
Minimum Links: 0
		Ports in the group:
		-------------------
Port: Gi1/0/11
------------

Port state    = Down Not-in-Bndl 
Channel group = 20          Mode = Active          Gcchange = -
Port-channel  = null        GC   =   -             Pseudo port-channel = Po20
Port index    = 0           Load = 0x00            Protocol =   LACP

Flags:  S - Device is sending Slow LACPDUs   F - Device is sending fast LACPDUs.
        A - Device is in active mode.        P - Device is in passive mode.

Local information:
                            LACP port     Admin     Oper    Port        Port
Port      Flags   State     Priority      Key       Key     Number      State
Gi1/0/11  SA      down      32768         0x14      0x0     0x10C       0x45  

Age of the port in the current state: 0d:00h:09m:13s

Port: Gi1/0/12
------------

Port state    = Down Not-in-Bndl 
Channel group = 20          Mode = Active          Gcchange = -
Port-channel  = null        GC   =   -             Pseudo port-channel = Po20
Port index    = 0           Load = 0x00            Protocol =   LACP

Flags:  S - Device is sending Slow LACPDUs   F - Device is sending fast LACPDUs.
        A - Device is in active mode.        P - Device is in passive mode.

Local information:
                            LACP port     Admin     Oper    Port        Port
Port      Flags   State     Priority      Key       Key     Number      State
Gi1/0/12  SA      down      32768         0x14      0x0     0x10D       0x45  

Age of the port in the current state: 0d:00h:08m:38s

		Port-channels in the group: 
		---------------------------

Port-channel: Po20    (Primary Aggregator)

------------

Age of the Port-channel   = 0d:00h:10m:08s
Logical slot/port   = 10/20          Number of ports = 0
HotStandBy port = null 
Port state          = Port-channel Ag-Not-Inuse 
Protocol            =   LACP
Port security       = Disabled

Kasulikud lisamaterjalid

Pärit leheküljelt "https://www.auul.pri.ee/wiki/index.php?title=Cisco_kommutaator&oldid=1005"