Cisco kommutaator - Redigeerimiste ajalugu

Imre – 8. juuni 2024, kell 22:50

2024-06-08T22:50:50Z

←Vanem redaktsioon		Redaktsioon: 9. juuni 2024, kell 01:50
88. rida:		88. rida:

	harjutus-sw#		harjutus-sw#
		+	</pre>
		+
		+	===LACP===
		+
		+	Seadistamine
		+
		+	TODO
		+
		+	Tulemuse esitamine
		+
		+	<pre>
		+	harjutus-sw#show etherchannel detail
		+	Channel-group listing:
		+	----------------------
		+
		+	Group: 20
		+	----------
		+	Group state = L2
		+	Ports: 2 Maxports = 16
		+	Port-channels: 1 Max Port-channels = 16
		+	Protocol: LACP
		+	Minimum Links: 0
		+	Ports in the group:
		+	-------------------
		+	Port: Gi1/0/11
		+	------------
		+
		+	Port state = Down Not-in-Bndl
		+	Channel group = 20 Mode = Active Gcchange = -
		+	Port-channel = null GC = - Pseudo port-channel = Po20
		+	Port index = 0 Load = 0x00 Protocol = LACP
		+
		+	Flags: S - Device is sending Slow LACPDUs F - Device is sending fast LACPDUs.
		+	A - Device is in active mode. P - Device is in passive mode.
		+
		+	Local information:
		+	LACP port Admin Oper Port Port
		+	Port Flags State Priority Key Key Number State
		+	Gi1/0/11 SA down 32768 0x14 0x0 0x10C 0x45
		+
		+	Age of the port in the current state: 0d:00h:09m:13s
		+
		+	Port: Gi1/0/12
		+	------------
		+
		+	Port state = Down Not-in-Bndl
		+	Channel group = 20 Mode = Active Gcchange = -
		+	Port-channel = null GC = - Pseudo port-channel = Po20
		+	Port index = 0 Load = 0x00 Protocol = LACP
		+
		+	Flags: S - Device is sending Slow LACPDUs F - Device is sending fast LACPDUs.
		+	A - Device is in active mode. P - Device is in passive mode.
		+
		+	Local information:
		+	LACP port Admin Oper Port Port
		+	Port Flags State Priority Key Key Number State
		+	Gi1/0/12 SA down 32768 0x14 0x0 0x10D 0x45
		+
		+	Age of the port in the current state: 0d:00h:08m:38s
		+
		+	Port-channels in the group:
		+	---------------------------
		+
		+	Port-channel: Po20 (Primary Aggregator)
		+
		+	------------
		+
		+	Age of the Port-channel = 0d:00h:10m:08s
		+	Logical slot/port = 10/20 Number of ports = 0
		+	HotStandBy port = null
		+	Port state = Port-channel Ag-Not-Inuse
		+	Protocol = LACP
		+	Port security = Disabled
	</pre>		</pre>

Imre – 8. juuni 2024, kell 22:29

2024-06-08T22:29:15Z

←Vanem redaktsioon		Redaktsioon: 9. juuni 2024, kell 01:29
94. rida:		94. rida:
	* cheat sheet - https://www.slideshare.net/slideshow/cisco-switch-commands-cheat-sheet/31026863		* cheat sheet - https://www.slideshare.net/slideshow/cisco-switch-commands-cheat-sheet/31026863
	* https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/15-0_2_se/configuration/guide/3750x_cg/swvlan.html		* https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/15-0_2_se/configuration/guide/3750x_cg/swvlan.html
		+	* https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750/software/release/12-2_52_se/configuration/guide/3750scg/swiosfs.html

Imre – 8. juuni 2024, kell 22:28

2024-06-08T22:28:01Z

←Vanem redaktsioon		Redaktsioon: 9. juuni 2024, kell 01:28
9. rida:		9. rida:
	<pre>		<pre>
	$ cu ... -s 9600		$ cu ... -s 9600
		+	</pre>
		+
		+	===Kasutajate haldamine===
		+
		+	Uue kasutaja lisamiseks sobib öelda
		+
		+	<pre>
		+	conf t
		+	username ...
	</pre>		</pre>

Imre – 8. juuni 2024, kell 22:27

2024-06-08T22:27:15Z

←Vanem redaktsioon		Redaktsioon: 9. juuni 2024, kell 01:27
2. rida:		2. rida:

	TODO		TODO
		+
		+	===Serial kaabli kasutamine===
		+
		+	Sobib kasutamiseks nö tavaline cisco helesinine lint kaabel, üks ots rj45 ja teine ots 9-pin serial mamma (nt ühendada arvutisse üle serial-usb-dongle)
		+
		+	<pre>
		+	$ cu ... -s 9600
		+	</pre>

	===Failisüsteemiga töötamine===		===Failisüsteemiga töötamine===

Imre: /* Failisüsteemiga töötamine */

2024-06-08T22:25:46Z

Failisüsteemiga töötamine

←Vanem redaktsioon		Redaktsioon: 9. juuni 2024, kell 01:25
25. rida:		25. rida:
	<pre>		<pre>
	harjutus-sw#configure replace flash1:imretest-rc		harjutus-sw#configure replace flash1:imretest-rc
		+	This will apply all necessary additions and deletions
		+	to replace the current running configuration with the
		+	contents of the specified configuration file, which is
		+	assumed to be a complete configuration, not a partial
		+	configuration. Enter Y if you are sure you want to proceed. ? [no]: y
		+	Total number of passes: 0
		+	Rollback Done
		+
		+	harjutus-sw#
	</pre>		</pre>

Imre – 8. juuni 2024, kell 22:25

2024-06-08T22:25:21Z

←Vanem redaktsioon		Redaktsioon: 9. juuni 2024, kell 01:25
3. rida:		3. rida:
	TODO		TODO

		+	===Failisüsteemiga töötamine===
⚫	===~~Misc~~===
		+
		+	Seadistuse salvestamine flash seadmele
		+
		+	<pre>
		+	harjutus-sw#copy running-config flash1:imretest-rc
		+
		+	harjutus-sw#dir
		+	Directory of flash:/
		+
		+	2 -rwx 3096 Mar 1 1993 04:37:25 +02:00 multiple-fs
		+	3 -rwx 796 Mar 1 1993 04:37:40 +02:00 vlan.dat
		+	4 -rwx 3843 Mar 1 1993 04:37:25 +02:00 private-config.text
		+	5 -rwx 7477 Mar 1 1993 04:32:07 +02:00 imretest-rc
		+	6 -rwx 14610998 Dec 9 2018 14:02:18 +02:00 c3750e-ipbasek9-mz.122-55.SE12.bin
		+	8 -rwx 6048 Mar 1 1993 04:37:25 +02:00 config.text
		+	</pre>
		+
		+	Salvestatud seadistuse kasutusele võtmine ('replace' asendab kogu parasjagu kehtestatud seadistuse failis oleva seadistusega)
		+
		+	<pre>
		+	harjutus-sw#configure replace flash1:imretest-rc
		+	</pre>
		+
		⚫	===VLAN===

	Vlan liidese moodustamine		Vlan liidese moodustamine

Imre: Uus lehekülg: '===Sissejuhatus=== TODO ===Misc=== Vlan liidese moodustamine

 harjutus-sw#conf t Enter configuration commands, one per line.  End with CNTL/Z. harjutus-sw(config)#vlan 221 harjutus-sw(config-vlan)#name vlan_name_222 harjutus-sw(config-vlan)#end harjutus-sw#  harjutus-sw#show run vlan 222 Building configuration...  Current configuration: ! vlan 222  name vlan_name_222 end

Vlan liidese seadistuse esitamine

 harjutus-sw#sh run int vlan 10 Building config...'

2024-06-08T21:39:40Z

Uus lehekülg: '===Sissejuhatus=== TODO ===Misc=== Vlan liidese moodustamine <pre> harjutus-sw#conf t Enter configuration commands, one per line. End with CNTL/Z. harjutus-sw(config)#vlan 221 harjutus-sw(config-vlan)#name vlan_name_222 harjutus-sw(config-vlan)#end harjutus-sw# harjutus-sw#show run vlan 222 Building configuration... Current configuration: ! vlan 222 name vlan_name_222 end </pre> Vlan liidese seadistuse esitamine <pre> harjutus-sw#sh run int vlan 10 Building config...'

Uus lehekülg

===Sissejuhatus===

TODO

===Misc===

Vlan liidese moodustamine

<pre>
harjutus-sw#conf t
Enter configuration commands, one per line. End with CNTL/Z.
harjutus-sw(config)#vlan 221
harjutus-sw(config-vlan)#name vlan_name_222
harjutus-sw(config-vlan)#end
harjutus-sw#

harjutus-sw#show run vlan 222
Building configuration...

Current configuration:
!
vlan 222
name vlan_name_222
end
</pre>

Vlan liidese seadistuse esitamine

<pre>
harjutus-sw#sh run int vlan 10
Building configuration...

Current configuration : 65 bytes
!
interface Vlan10
ip address 192.168.10.156 255.255.255.0
end

harjutus-sw#
</pre>

===Kasulikud lisamaterjalid===

* cheat sheet - https://www.slideshare.net/slideshow/cisco-switch-commands-cheat-sheet/31026863
* https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/15-0_2_se/configuration/guide/3750x_cg/swvlan.html